生益科技-小9直播体育免费直播下载ios

cn/en

s1000-2

特点

● 无铅兼容fr-4.0板材
高tg170℃(dsc),uv blocking/aoi兼容
高耐热性
低的z轴热膨胀系数
优良的通孔可靠性
优异的anti-caf性能
低吸水率

应用领域

● 广泛应用于计算机与通讯设备,工业控制用高档仪器仪表、路由器等
  • 产品性能
  • 产品证书
  • 资料下载
items method condition unit typical value
tg ipc-tm-650 2.4.25 dsc 180
ipc-tm-650 2.4.24.4
dma

185
td ipc-tm-650 2.4.24.6 5% wt. loss 345
cte (z-axis) ipc-tm-650 2.4.24 before tg ppm/℃ 45
after tg ppm/℃ 220
50-260℃ % 2.8
t260 ipc-tm-650 2.4.24.1 tma min 60
t288 ipc-tm-650 2.4.24.1 tma min 20
t300 ipc-tm-650 2.4.24.1
tma min 5
thermal stress ipc-tm-650 2.4.13.1 288℃, solder dip -- 100s  no delamination
volume resistivity ipc-tm-650 2.5.17.1 after moisture resistance mω.cm 2.2 x 108
e-24/125 mω.cm 4.5 x 106
surface resistivity ipc-tm-650 2.5.17.1 after moisture resistance 7.9 x 107
e-24/125 1.7 x 106
arc resistance ipc-tm-650 2.5.1 d-48/50 d-4/23 s 100
dielectric breakdown ipc-tm-650 2.5.6 d-48/50 d-4/23 kv 63
dissipation constant (dk) ipc-tm-650 2.5.5.9 1mhz -- 4.8
iec 61189-2-721 10ghz --
dissipation factor (df) ipc-tm-650 2.5.5.9 1mhz -- 0.013
iec 61189-2-721 10ghz --
peel strength (1oz hte copper foil) ipc-tm-650 2.4.8 a n/mm
after thermal stress 288℃,10s n/mm 1.38
125℃ n/mm 1.07
flexural strength lw ipc-tm-650 2.4.4 a mpa 562
cw ipc-tm-650 2.4.4 a mpa 518
water absorption ipc-tm-650 2.6.2.1 e-1/105 d-24/23 % 0.10
cti iec60112 a rating plc 3
flammability ul94 c-48/23/50 rating v-0
e-24/125 rating v-0

remarks:

1. specification sheet: ipc-4101/126, is for your reference only.

2. all the typical value is based on the 1.6mm specimen, while the tg is for specimen≥0.50mm.

3. all the typical values listed above are for your reference only and not intended for specification. please contact shengyi technology co., ltd. for detailed information. all rights from this data sheet are reserved by shengyi technology co., ltd.

explanation: c=humidity conditioning, d=immersion conditioning in distilled water, e=temperature conditioning

the first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.


网站地图