shengyi technology co., ltd.-小9直播体育免费直播下载ios

product

autolad3

characteristic

● low z-axis cte, excellent through-hole reliability

● excellent pct performance and low water absorption, high heat and humidity resistance

● excellent mechanical processibility and thermal resistance, lead-free compatible fr-4.0

application area

● designed for high thermal resistance and anti-caf functioned automotive electronics. also suitable for multilayer and high-layer count pcbs
  • product performance
  • product certificate
  • data download
items method condition unit typical value
tg 2.4.24.4 dma 185
2.4.25d dsc
180
td 2.4.24.6 5% wt. loss 355
t288
2.4.24.1 tma min 30
t260 2.4.24.1
tma min
60
thermal stress
2.4.13.1
288℃, solder dip
- >100s no delamination
cte (z-axis) 2.4.24 before tg ppm/℃ 40
after tg ppm/℃ 210
50-260℃ % 2.4
dissipation constant (1mhz) 2.5.5.9 c-24/23/50 -

4.9

dissipation factor (1mhz)
2.5.5.9
c-24/23/50
- 0.018
volume resistivity 2.5.17.1 c-96/35/90 mω/cm 8.12×108
surface resistivity
2.5.17.1
c-96/35/90 2.65×107
arc resistance 2.5.1 d-48/50 d-0.5/23 s 135
dielectric breakdown 2.5.6 d-48/50 d-0.5/23 kv 45 kv nb
peel strength (1oz) 2.4.8 288℃/10s n/mm 1.4
flexural strength(lw/cw) 2.4.4 a mpa 560/440
water absorption 2.6.2.1 e-1/105 d-24/23 % 0.08
flammability
ul94
c-48/23/50
rating
v-0
cti iec60112 a rating plc 3

remarks:

1. all the typical values are based on the 1.6mm specimen. test method is according to ipc-tm-650.

2. all the typical values listed above are for your reference only and not intended for specification. please contact shengyi technology co., ltd. for detailed information. all rights from this data sheet are reserved by shengyi technology co., ltd.

explanation: c=humidity conditioning, d=immersion conditioning in distilled water, e=temperature conditioning

the first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.


网站地图